Ways to Protect the Concrete Batching Plant

1. Check the wire rope. You’d better place some butter on the wire rope weekly to guarantee commodity concrete batching plant runs completely. If the wire rope is worn badly, it needs to be replaced timely. Check the oil level of gearbox and see its number of concentrated oil pump. If necessary, please replace the oil.Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:twin shaft compulsory concrete mixer,concrete batching plants,concrete mixer,blocking making machine,concrete pump,etc.   2. Keep the water supply system of concrete batching plant clean to prevent its being blocked. Check and clean suction valve regularly. 3. Check whether the switch is loose and ensure that it can not be loose. 4. Check the main engine of concrete batching plant. Whether the blade egg laying type block machines, connecting bolts of support arm are loose. Adjust the gap of blade and cylinder wall. The maximum gap is 5mm. make sure it is tightened. 5. The wire of each motor, electrical components should not be loose. Check the situation of exchange contactor. 6. The distribution box of commodity concrete batching plant should be cleaned. The limit switch should be dry, andconcrete mixer is in unscrewed state. You’d better check it weekly. If you don’t use the device for a long-term block making machines, then please place it properly.