Bila

Configuring BGP
This chapter describes how to configure Border Gateway Protocol (BGP). For a complete description of the BGP commands in this chapter, refer to the “BGP Commands” chapter of the Cisco IOS IP Command Reference, Volume 2 of 3: Routing Protocols. To locate documentation of other commands that appear in this chapter, use the command reference master index, or search online. For multiprotocol BGP configuration information and examples, refer to the “Configuring Multiprotocol BGP Extensions for IP Multicast” chapter of the Cisco IOS IP Configuration Guide. For multiprotocol BGP command descriptions, refer to the “Multiprotocol BGP Extensions for IP Multicast Commands” chapter of the Cisco IOS IP Command Reference. BGP, as defined in RFCs 1163 and 1267, is an Exterior Gateway Protocol (EGP). It allows you to set up an interdomain routing system that automatically guarantees the loop-free exchange of routing information between autonomous systems. For protocol-independent features, see the chapter “Configuring IP Routing Protocol-Independent Features” in this book. To identify the hardware platform or software image information associated with a feature, use the Feature Navigator on Cisco.com to search for information about the feature or refer to the software release notes for a specific release. For more information, see the “Identifying Supported Platforms” section in the “Using Cisco IOS Software” chapter in this book.

The Cisco BGP Implementation
In BGP, each route consists of a network number, a list of autonomous systems that information has passed through (called the autonomous system path), and a list of other path attributes. We support BGP Versions 2, 3, and 4, as defined in RFCs 1163, 1267, and 1771, respectively. The primary function of a BGP system is to exchange network reachability information with other BGP systems, including information about the list of autonomous system paths. This information can be used to construct a graph of...