Ore Spiral Classifier with High Reputation

Ore spiral classifier is used for processing minerals. It is often applied in quarries as beneficiation equipment. Based on years’ experience of production, Hongxing spiral are designed to provide the most effective pool area and overflow velocity requirements.

The structure of the spiral classifier, semi-circular sink, steel plate and steel welded into the feed inlet in the middle of the tank sidewall, the lower part of the tank top of the return sand mouth. The bottom of the tank bottom of the release valve, this valve is closed during normal working hours in the open release of the special circumstances of the failure and other pulp. Tank equipped with a longitudinal axis of the hollow shaft to clamp equipped with a support plate frame compatible with the spiral lead angle, the above fixed around the spiral blades, the screw mechanism of multi-pitch helix using the double-headed, and equipped with a resistance to the leaf edge mill liner.

spiral classifier by means of solid particle size, the proportion of different, and therefore the principle of settling velocity in the liquid, fine mineral particles floating in the water into the overflow, the coarse ore particles sink in the bottom of the tank. Push the upper part of the discharge by the screw, a kind of mechanical grading equipment, can mill to grind the material powder level in the filter, and then the crude material using spiral piece rotary vane screw mill feed inlet, to filter out the fine material discharged from the overflow tube. The machine base is made of channel steel body welded by steel plate. Into the head of the screw axis, the first axis, using pig iron, wear-resistant and durable to enhance the device electric and manual. stone production line:http://www.crusher-machine.com/stone-production-line.html
sand washer:http://www.hx-crusher.com/sand_washer.html

Installation of spiral classifier:

The inspection machine was no damage, no loose screws, you can install. Spiral Classifier...