Jaw Crusher Towards International Development Road

Jaw crusher towards international development road_Ivylm522prosperous Heavy vertical crusher in place before the boot should be by observing the vortex of the hole to check dynamic crushing cavity if there ore bed, and if not, should whirl crushing chamber Rotary Kiln to the accumulation of material particle size less than 25mm of material until the material gravity, the formation of the ore bed.Check the impeller direction of rotation from the feed inlet, the impeller should be counter-clockwise rotation, otherwise it should be adjusted to the motor wiring.The starting order for the broken machine and Jaw Crusher material handling equipment as follows: the feed belt conveyor discharge opening belt conveyor → 5x new Sand → crusher must be no-load starting, must be broken machine in normal operation only after feeding.Feed Size in strict accordance with the provisions of all kinds of feed size, feed, is strictly prohibited materials greater than the specified size into the crusher, otherwise it will cause excessive wear of the imbalance of the impeller and impeller, and even cause clogging impeller circulation and center feeding tube, the crusher is not working properly, when the discovery of bulk materials should be promptly removed.Discharge belt conveyor to stop running, you should immediately stop feeding and discharge belt conveyor should be open and feeding system interlock.Parking.Otherwise it will create breaks the impeller, which burned motor.Feeding should be uniform and continuous.Broken in the process of machine operation, shall not have ball mill excessive vibration and abnormal noise, whether it should be immediately stopped and checked, to drive in order to troubleshoot

ball mill:   http://www.china-xingbang.com/      
ball mill:   http://www.xbm-mining.com      
block machine:   http://www.xbm-aac.com
.Broken in the process of machine work, observation doors should be sealed tightly closed, install the belt cover. Routine maintenance and security...