The Performance of Hammer Crusher Is Determined by Multi-Factors

Hammer crusher is often used to crush fiber structure, cracked wood of strong elasticity and toughness, paper, or the waste of cracked asbestos cement to recycle the asbestos fiber and so on. Moreover, the hammer crusher can not only be used in the crushing product line and the sand making product line, but also be used as the cone crusher in the ores dressing product line. Next Hongxing Machinery, a leading and professional hammer crusher manufacturing company will give four suggestions about the service life of the hammer crusher:

1. Design Structure and Quality of Hammer Crusher:

Driven by the motor, the rotor of hammer crusher which consists of main shaft, disk, pin shaft and hammers rotates at high speed in the crushing cavity. Raw materials enter the cavity through the feed opening. Materials in the cavity are blown, impacted and ground by the hammer. Below the rotor is the sieve plate, which screens the materials. Materials in the hammer crusher that reach the required size can be discharged from the sieve plate, while the oversize materials will be left and crushed again until reach the standard size. The final product size of the hammer crusher can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.

2. Technical Parameters of Hammer Crusher:calcinating rotary kiln:

Usually, aritificial sand process has the following technological flow: simple screening flow, classifying flow, and finess modulus adjustment. River sand resource is becoming less and less, so people begin to find new sand source from artificial sand. Meantime, artificial sand has lots of advantages that natural sand does not have. Artificial sand process is not an easy thing. Qualified artificial sand is processed by different standard equipments. It always has strict requirements about the outside coarseness and circularity. Unqualified artificial sand usually can not reach these...