Crusher Components with High Strength

There are two eccentric shafts rotating at high speed at the same time from opposite directions, thus the strong centrifugal force is formed. The component forces of centrifugal force along the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the feeder vibrate along straight line. When materials are fed into the feeder, they may be thrown up and move like curve, then fall down. The materials will move forward on the slope surface of the screen.
Single and double toggle jaw crusher are constructed by heavy duty fabricated plate frames with throughout reinforcing ribs. The crusher components are high strength designed to accept high power draw. Manganese steel is used for both fixed and movable jaw faces. Heavy flywheels allow crushing peaks on tough materials. Double Toggle jaw crusher may feature by its hydraulic toggle adjusting mechanisms.
    Jaw crusher is one of the most popular crushing machine together with Cone breaker, Impact crusher and Compound crusher in the world, and Hongxing is one of the most famous crusher suppliers in the world. Jaw crusher is ideally suitable for primary and secondary crushing. The highest anti-pressure strength of its crushed material is 320MPA. Our design and production are of high position both at home and abroad. According to common sense, the driven equipment of diesel engine is generally not used under conditions of high temperature and high dust, because the high dust will block up the air filter and radiator of diesel engine, resulting in failure-prone, so as to impact the brick crushing operation.

cone crusher : http://www.ore-machine.com/cone-crusher.html
drum dryer : http://www.crusher-export.com/cement-rotating-dryer.html