Grinding Mill-Ball Mill China Xbm

XBM-Henan Zhengzhou Jaw crusher Detailed Product Description

Jaw crusher
1.Rational Construction
2.Uniform particle sizes
3.Primary crush,big crushing ratio
4.Durable wear parts


Jaw crusher

1.Jaw Crusher:
Jaw Crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material to be crushed is 320MPa. The jaw crusher is widely used in mining, metall-urgical industry, building material,Jaw Crusher manufacturers highway, railway, and chemical industry.




2.Working Principle of Jaw Crusher:
The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher.


3.Technical parameter of jaw crusher:

Model Size of Feeder Opening
(mm) Max. Feeding Size
(mm) Adjustment range
(mm) Capacity
(t/h) Motor Power
(kw) Overall Dimension
(mm) Weight(t)
PE150×250 150×250 125 10-40 1-3 5.5 896×745×935 0.8
PE250×400 250×400 200 20-50 5-20 15 1430×1310×1340 3
PE400×600 400×600 350 40-100 15-60 30-37 1700×1732×1653 7
PE500×750 500×750 425 50-100 40-110 45-55 2035×1921×2000 12
PE600×900 600×900 480 65-160 90-180 55-75 2290×2206×2370 17
PE750×1060 750×1060 630 80-140 110-320 90-110 2655×2302×3110 29
PE900×1200 900×1200 750 95-165 220-450 110-132 3800×3166×3045 58
PEX150×250 150×250 125 10-40 1-3 5.5 896×745×935 1.5
PEX150×750 150×750 125 18-18 5-16 15 896×745×935 3.8
PEX250×750 250×750 210 25-60 15-30 22-30 1667×1545×1020 5
PEX250×1000 250×1000 210 25-60 15-50 30-37 1550×1964×1380 7...