Vibrating feeder. Advantages

The vibrating feeder is used to transfer the large size materials and granular materials from Silo to receiving device uniformly, periodically and continuously in the production flow and to feed materials into the crusher continuously and uniformly also to screen the materials in the sandstone production line. The Vibrating Feeder is widely used to match the crushing and sieving equipments in many industries including metallurgy, coal mine, mineral dressing, building material, chemical, grinding, etc.First of all, the choice of heat source. The coal stove has indirect heating and direct heating. Among them, the indirect heating hot air is clean, but the efficiency is low, suitable for dry the material can’t be melt in smoke dust. And direct heating are dust pollution and affect the quality of products, but the thermal energy utilization is very full and has high thermal efficiency. It is the priority when the drying material mixed a small amount of smoke and little effect in the quality. At present, there are a lot of dryer manufacturers use oil burner, the hot blast stove has the advantages of simple operation, rapid heating, temperature stability, convenient control and low cost.The sand making machine has entered the application in the high-speed railway construction, and the demand of the sand making machine continue rising.Triple drum rotary drier is widely used in drying granule material in fixed moisture range such as yellow ground in dry mortar industry, all kinds of molding sand in casting industry and blast fumes slag in building material/cement industry, small granule resistance and not have strict control to smoke. According to different moisture requirement for dried material in various industries, the finished product water content could be able to below 1-0.5%.Compared to the single drum rotary dryer, the triple drum rotary dryer has the followingAs the railway ministry reported that: the whole railroad construction mileage of our country will...