An Analysis of Hongxing Sand Dryer

The spiral washer and Sand washer is widely used in the ultrafine classification process for a variety of materials, including the abrasives, calcite, talc, limestone, graphite, quartz, diatomaceous earth, chemical raw materials (toner, additives, phosphor, dyes, pigments, silica gel, etc), ceramic powder, pharmaceuticals, pesticides, glass powder, and so on. In mining industry, Spiral separator is widely used in the production flow of metal processing. According to the difference in sedimentation rate of mineral particles and mud, the particle sizes of ores with 1.5mm-0.03mm are classified. Waste mud or water for ore sand can be separated from the ores. This series of density separator also usually applied to ore washing, desliming and dehydration and so on.Our screw separators are divided into single and double screw separators. Besides, they are also divided into high weir and submerged screw graders. If the overflow edge is higher than the center line of spiral shaft and lower than the external diameter of spiral at the overflow end, the graders are high weir ones. The spiral washer and Sand washer is widely used in the ultrafine classification process for a variety of materials, including the abrasives, calcite, talc, limestone, graphite, quartz, diatomaceous earth, chemical raw materials (toner, additives, phosphor, dyes, pigments, silica gel, etc), ceramic powder, pharmaceuticals, pesticides, glass powder, and so on. In mining industry, Spiral separator is widely used in the production flow of metal processing. According to the difference in sedimentation rate of mineral particles and mud, the particle sizes of ores with 1.5mm-0.03mm are classified. Waste mud or water for ore sand can be separated from the ores. This series of density separator also usually applied to ore washing, desliming and dehydration and so on.Our screw separators are divided into single and double screw separators.Due to the air and the material mix uniformly and the air andThe...