What Are the Strong Point of Vibratory Feeder

We all know that the vibrating feeder , In the production process, can put the massive granular materials to feed bin continuously, timing from the bunker,thus preventing crashing phenomenon of feeder for feeding by uneven,extending equipment using life.

Most systems were out of service by the mid-20th century and relatively few remain in the 21st century, even fewer in their original location and configuration. The vibrating feeder is composed of feeding cavity, vibration generator, support spring and transmission device. The vibration source of the vibration case is the vibration generator, which is composed of two eccentric drafts both active and passive and gears agrege.

In addyion,active draft will be driven by vee belt and gears on the active draft will joggle the passive draft to rotate, thus the two drafts will rotate simultaneously and reversly to make the bank vibrate and materials transferred continuously to fulfill the purpose of material transferring. Alignment of the system was critical and problematic for long shafts that were subject to expansion and contraction, settling and vibration.

The characteristics of vibrating feeder is as following:

Vibration smoothly,Reliable work,long life;It can adjust excitation force,change and control flow at any time,convenient adjustment stability; vibration motor as excitation source,and have low noise ,low electric consumption .

Power loss with line shafts varied widely and was typically 25% and often much higher; however, usingroller bearings and good quality lubrication could minimize losses. Roller and spherical bearings gained acceptance in the decade before electrification of factories began.

Regulation performance, no rush material phenomenon. The most important is that it have simple structure , reliable operation.

Of course, maybe my summary is not comprehensive. And we also have other mining machines, such as jaw crusher, ball mill sand maker and so on. If you have other supplement,...