Small Cone Crusher Operation Guidence (B)

(C) The maintenance and operation of cone crusher

Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:mini crusher,hammer mill,We will provide you with the best product and service.

1, Start the cone crusher before feeding.

2, Feeding the materials evenly into the crushing cavity and carefully avoid side feed so that prevent the load mutation or unilateral loads.

3, Under the normal working conditions, the bearing temperature shall not rise exceed 30 degree, the maximum temperature must not exceed 70 degree, or you should stop immediately and identify the reasons and eliminate.

4, Stop feeding before turn off the machine, the cone crusher can be shut down until the broken material completely empty out from the crushing chamber.

5, While in use, immediately turn off the motor if the crushing cavity was blocked with materials.You can restart it after the materials are all discharged.

6, Use another end of the cone crusher plate if it is worn.

(D) The lubrication of cone crusher

1, Check regular the lubrication of the friction surfaces and smooth operations regularly, ensuing the proper functioning and longer service life of the machine.

2, The grease using for this cone crusher should be decided according to the environment water well drilling rig price, temperature and other conditions powder packing machine, generally calcium, sodium or calcium sodium based grease can be used.

3, The adding grease volume is about 40-70%. It must be replaced every three months and the bearing and bearing plate should be cleaned with clean gasoline or kerosene.

4, Grease must be added to the junction between the elbow board and ancon plate prior to start.


mini crusher:http://www.dwcrusher.com/
packing machine:http://www.daswellmining.com/
powder packing...