L293D St (Motor Driver Ic)

L293D L293DD
PUSH-PULL FOUR CHANNEL DRIVER WITH DIODES
600mA OUTPUT CURRENT CAPABILITY PER CHANNEL 1.2A PEAK OUTPUT CURRENT (non repetitive) PER CHANNEL ENABLE FACILITY OVERTEMPERATURE PROTECTION LOGICAL ”0” INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY) INTERNAL CLAMP DIODES DESCRIPTION The Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides, DC and stepping motors) and switching power transistors. To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included. This device is suitable for use in switching applications at frequencies up to 5 kHz. BLOCK DIAGRAM

SO(12+4+4)

Powerdip (12+2+2)

ORDERING NUMBERS: L293DD L293D

The L293D is assembled in a 16 lead plastic packaage which has 4 center pins connected together and used for heatsinking The L293DD is assembled in a 20 lead surface mount which has 8 center pins connected together and used for heatsinking.

June 1996

1/7

L293D - L293DD
ABSOLUTE MAXIMUM RATINGS
Symbol VS V SS Vi V en Io P tot Tstg, Tj Supply Voltage Logic Supply Voltage Input Voltage Enable Voltage Peak Output Current (100 µs non repetitive) Total Power Dissipation at Tpins = 90 °C Storage and Junction Temperature Parameter Value 36 36 7 7 1.2 4 – 40 to 150 Unit V V V V A W °C

PIN CONNECTIONS (Top view)

SO(12+4+4)

Powerdip(12+2+2)

THERMAL DATA
Symbol Rth j-pins Rth j-amb Rth j-case Decription Thermal Resistance Junction-pins Thermal Resistance junction-ambient Thermal Resistance Junction-case max. max. max. DIP – 80 14 SO 14 50 (*) – Unit °C/W °C/W

(*) With 6sq. cm on board heatsink.

2/7

L293D - L293DD
ELECTRICAL CHARACTERISTICS (for each channel, VS = 24 V, VSS = 5 V, Tamb = 25 °C, unless otherwise specified)
Symbol VS...