Why Material Back of Bucket Conveyor May Excess?

Along with the increasing popular of mining project, more and more people invested in producing stone crusher machine for mining process. And with the development of mining machinery industry, there are many kinds of mining machines in the market, such as jaw crushers, compound crusher, sand maker, bucket elevator and so on, and saying bucket elevator, have you ever heard of it? If you have not ever heard of it, today our expert of HXJQ will talk something about it. I think you can read this article with your a little time.

Lift back to the material refers to material in the discharge position is not closed to discharged completely, and has some material back to raising pattern within the phenomenon.In the work of ascension, if the elevator back too much, is bound to reduce the production efficiency, increase power consumption and the rate of the broken material.The cause of back more material has the following points:

(1) the hopper running too fast hoist raising of different materials, hopper running speed are different: generally improve dry powder and granular materials, speed is about 1 ~ 2 m/s;Ascension block material, speed of 0.4 ~ 0.6 m/s;Improve the wet powder and granular materials, at the rate of 0.6 ~ 0.8 m/s.Excessive speed, discharge, resulting in back.At this time should be according to the material of ascension appropriately reduce the speed of the hopper, avoid material back. (2) the nose export discharging tongue plate installation is not appropriate, the tongue plate from the hopper discharge position too far, will cause the material back.Should timely adjust the tongue plate position, avoid material back.

Hongxing Machinery is known for its high-quality products (Jaw crusher, cone crusher, compound crusher,etc) as well as its own bearingly excellent service, say, pre-sale service, on-the-sale service and after-sales service. We have specialists specially to choose the right machines and design the most suitable production line that...