The Differences Between Micro Powder Mill and Other Machine You Should Know

With the development of powder market requirement, the past mill machine cannot satisfy the need of production, so a new type of grinding equipment means a lot to the market. The emergence of micro powder mill for the processing of the limestone powder plays a great role in the market.

Micro powder mill is a new type of grinding equipment, especially suit for limestone powder processing production. Its characters of high efficiency, low power consumption, small size, small one-time investment, and pollution-free help this mill machine gain good reputation from the market . Its fineness can reach 2500 mesh, which can satisfy all the fineness requirements for the limestone powder on the market at present.

The differences between micro powder mill and other machine:

1. HGM series micro powder mill is highly efficient (twice as much as jet mill, mixing grinder and ball mill)

2. The spare parts of micro powder mill can serve much longer time (2-3 times longer than that of impact mill or turbo mill.

3. High safety and reliability of the micro powder mill (no rolling bearings and screws in the grinding cavity, so no problems caused by the wear of bearings or screws)

4. The micro powder mills are characterized by high fineness (final size: 325-3000 mesh, D97 5 micron), but other machine can’t reach those fineness.

5. Environment-friendly

The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse materials return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster...