The Performance Characteristics of Raymond Mill and Maintenance

Is a production of crusher, sand production line, Raymond mill, ultrafine mill, Raymond mill, centrifugal mill, mill, processing equipment, independent research and development, independent of lean production, sales as one of the joint-stock enterprises. The company launched new Raymond grinding is based on long-term experience in R & D of powder, in accordance with the requirements of domestic and foreign several mill user and suggestions, the new milling equipment on the basis of the original Raymond mill through painstaking research design, thus creating a new era of international industrial grinding powder efficient, low energy consumption the.
Use and maintenance of new Raymond Mill
1) Raymond mill before installing the operating personnel must carry out technical training necessary to understand the principle, performance of Raymond mill, familiar with the operation regulation of Raymond mill. Raymond Mill in the use of process, should be fixed personnel responsible for the custody, operating personnel must possess a certain level of technology.
2) Raymond mill after a period of use, should be carried out maintenance, and repair replacement treatment on roller grinding ring blade wearing parts, grinding roller device, a careful examination of the connecting bolt and nut should be in use before and after, to see whether there is loose, grease is full.
3) to make the Raymond Mill normal, should make the "equipment maintenance equipment safety operation system" to ensure the long-term safe operation of milling machine, maintenance tools and necessary and grease and the corresponding accessories.
4) Raymond mill roller device for more than 500 hours to replace the roller using time, the rolling bearing of roller sleeve must be cleaned, the damaged parts should be replaced, fueling tool available manual oil pump and a grease gun.
5) stop, stop feeding, host continues to rotate, the residual material is to grinding, after about a minute, can close the...