Common Point of Crusher in Production Base

Parts of the feed from the center of the outer tube enter into the outside of the inside impeller of the vortex dynamic crushing cavity and being ejected out by the impeller crushed with high velocity. This is also why more people choose to the machine. The grain shape of products is cube and Flake content is low. It can be applied in many fields, especially for stone plastic, sand-production mechanism, and it can also be widely used in water and electricity, road, construction, cement, metal mining and other minor operations.Vertical shaft impact crushers have some features in common.

Firstly, every stone crusher has a feed hopper, which is invert bevel-shape. And the hopper is set a wear ring that the feed can enter into the stone crusher. The machine is a new crushing equipment and is generally used as secondary crusher. It can also be used as primary crusher according to the customer’s requirements by changing rotor and crushing cavity. It is worth mentioning that the machine is widely used in highway, power & water, railway, airport and other fields and these public places one thing in common that need rock with high quality standard. It has many features, such as high performance, high reduction ratio, cubic shape, etc. During the operation, the crusher will vibrate violently. The operators need to check the fastening situation of the scaleboard.

In addition, they need to inspect the gap between the scaleboard and the hammer. All these operation without increasing the power consumption, production capacity and improve the crushing efficiency. We has mention the vortex dynamic crushing cavity and impeller above, now let’s talk about these two parts of the stone crusher together because they operate tightly.The products like cone ball mil, construction ceramsite production line produced by our company have best quality and reasonable price. Fote Machinery won't disappoint you! Single-stage crusher:...