The Integral Parts of Fote Cone Crusher

From the bigger ways, the cone crusher includes the mainframe, the accessory system, and the quick-wear part; from the small respects, the mainframe contains the rack, the cone assembly shall, the moving cone assembly, the spring construction, the bowl type axis frame, the drive part. And the accessory part of the cone crusher includes the electrical system, the control cabinet, the thin oil lubricant system, the hydraulic clean cavity system. And the quick-wear part includes rolling mortar, the crushing wall, the main shaft bushing, the taper sleeve, the eccentric bushing, the bowl type tile, the feed tray and the spring. Because the quick-wear part of the cone crusher are a few more, if we want to ensure the cone crusher work efficiently, we should change the quick-wear parts in time. Our company can provide all kinds of components and parts of the cone crusher, helping your crusher working more efficiently.

Ore in the mine mouth via the allocation of disk in to the machine, and distribution vertical shaft was set up inside end, thanks for the vertical axis rotation, and entry to vibration, uniform distribution in the ore inside cone around. Using the support in the Toggle deal with and hinge, the cone is not switching upward or downward, to regulate the discharge in the mouth width. Metal using the many elements are manufactured, vibrant cone and repaired cone encounter laced with manganese metal liner to defend the cone from wear, put on liner may be replaced, the replacement, the liner in between the cone and poured melted direct near relationship in between them.

Additionally for the usual mind - and short-cone crusher, but in addition in between them, namely the distinction in between the medium-sized cone crusher that may be employed could also be employed inside broken chronology. Standard, medium-sized, brief mind cone crusher. The principal distinction could be the crushing chamber profile various shapes. Therefore, for the mine discharge particle...