What About Finishing Touches of Sandstone Crusher?

Since sandstone crusher has Good grain shape of final products—the final products have cube shape, reasonable grade and adjustable fineness modulus. Itis especially suitable for artificial sand production and stone deformation. As is proven by experiments, its sand making and stonedeformation performance is 30% higher than that of other traditional equipment. the gravel crusher is more and more popular in mining market. But do you know hte Finishing Touches of Sandstone Crusher?

Roller crusher, the gravel crusher is also called the roll crusher or double roller crusher. Gravel jaw crusher is Suitable for ore dressing, chemical, cement, building materials industries in broken and finely various kinds of minerals and rocks with medium hardness. Compound crusher is suitable for building materials, mining, metallurgy, chemical industry and broken limestone, clinker, coal and other minerals, its compressive strength does not exceed 140 million mpa humidity is not more than 15%. Compound crusher features are in the following: large production capacity;High crushing ratio, low energy consumption.Good sealing, stable operation;Maintenance is convenient.

Reprint gravel crusher machine.(1), cleaning the tail, on both sides of the fuselage and bridge of float coal, gangue,(2), protect the cable, pipe, tubing, and hanging neatly;(3), check the roadway support, in the case of secure passage reproduced machine;(4), walk the car to contact with the belt conveyor tail frame is good, not running deviation, set good lap after moving, to prevent coarse coal gangue crushing tape, ensure smooth flow of coal; Finishing touches of river gravel crusher is as follows:

1, working face coal winning machine stop cutting, goes on working face scraper conveyor, scraper conveyor, crusher and reproduced machine in coal all finish pull.2, the machine, the tail and clean coal and gangue on either side of the fuselage.3, the magnetic starter switch hand hit power position, lock lock lock...