How to Operate Complete Rice Mill Plant

Rice mill plant is necessary to our meal life. Especially in foreign countries, their main meal is rice. Foreign rice mill plant industry develops well. How to operate complete rice mill plant? And how make if bring you for more benefit? Next text may help you a lot.
1) Start method to start the Complete RICE MILL PLANT, the throttle handle on the [job] position, transplanting handle on [the] position, Complete Rice mill plant rose to the highest position of the Ministry before transplanting into [neutral] position, hydraulic locking handle placed [lock] position, the main shift lever is placed with a job appropriate to the location, the lifting of the brake lock, gear shift pedal slowly Cairu, transplanter start.
(2) Make sure that when you shift method back behind the safety, move away from the foot pedal speed, Cairu brake pedal will stop the fuselage, Complete Rice mill plant with the main shift lever for shifting. If the ramp speed is needed, set the brake pedal in the end, and hang brakes locked. Also, please put the main shift lever is placed [neutral] or [Bumiao] position. Otherwise, transplanter will slide cause accidents.
Note: The speed, make sure the Complete RICE MILL PLANT has stopped before proceeding. If not stopped under the state variable, may cause damage to the machine.
(3) Parking methods move away from the foot pedal speed, Complete Rice mill plant Cairu brake pedal to stop the fuselage. Throttle lever to the [low] position, the main shift lever is placed [Bumiao] position, turn off the Complete Rice mill plant. Confirm the Complete Rice mill plant has stopped, Complete Rice mill plant hang brake lock, key switch from dial down keys.
(4) Method turning slowly release the pedal from variable speed, deceleration, turning the steering wheel turn. Please do not move Complete Rice mill plant when the sharp turns at high speed will cause overturning or turn over accidents.
Ok, the above is detail introduction about rice milling plant...