Master the Reasonable Maintenance of Teeth Roll Crusher

Teeh roll crusher is suitable for the coarse and intermediate crushing of the brittle bulk materials in the cement, chemical, electric power, mining, metallurgy, building materials, refractory materials, coal and other industries. The roller crusher can also conduct crushing of the materials whose compression strength is less than 160Mpa. The roller crusher can be also applied to the crushing of the materials with high and intermediate hardness in the industry of metallurgy, building materials, refractories and other industrial sectors.

The reasonable maintenance and correct operation can ensure long-term continuous work, reduce stop time, only normal management and every day to check the normal work of the teeth-roll crusher, to prevent failure, and ensure that the work continuously. Therefore, the operator should pay attention to the following items:

1. put the plane, chassis activities device should remove dust and material, so as not to roller crusher manufacturers in europe met and can't broken material, activity in the chassis not bearing mobile, down to produces serious accidents;




2. before work must first start impact crusher for sale South Australia , wait for after normal speed, again to machines feeding, when parking program instead;

3. be controlled bearing temperature, may not be higher than the air temperature around 25 to 30;

4. check the material regularly, such as the discovery of a mouth clogged, should be cleared;

5. pay attention to all parts, such as the discovery of bolts shall be immediately screw loose;

6. not make machines produced load, should always be electric instrument;

7. check the vulnerable parts wear degree, always be worn parts; replace;

8. bear oiling in time, do not make in the place of oil bearing.

If you want to buy the smooth rolll crusher or have any other need for mining machinery, you can contact or visit Hongxing Machinery: sales@hxjq.com.

double roll crusher:...