Which Factors You Should Consider When Purchase the Mud System?

Drilling mud Cleaner http://www.kosungroup.com/products/solids-control-equipment/mud-cleaner.html is the second stage and the third stage solids control equipment which is the newest type to treat the drilling fluid. In the meantime mud cleaner has the higher cleaning function compared with separated desander and desilter. In addition to the reasonable design process, it equals the shale shaker. KOSUN mud cleaner structure is compact, it occupys small space and the function is powerful. Mud cleaner is the ideal device of the second stage and the third stage solid control to treat the drilling mud.

There are some tips about the mud system when you are going to purchase the mud equipment:

1) Type of drill you will be using
2) The drill rate
3) The type of solids
4) The length of your bore
5) The GPM of the pump
6) The tank volume you will need
7) The number of cones
8) The screen size

These factors are important to know so that you use a recycler that is adequate enough to clean the mud and protect the components on the rig, pump and cleaner. Once you have decided on the size of the mud system you need, there is more information that you should be armed with:

Screen surface: The more screen surface area you have means more volume that you can clean.

Screen selection: The mesh size of screens is measured by the number of holes per square inch on the screen. Different mesh sizes control the size of the cuttings that you remove. The same mesh size will not work in all drilling conditions. Sizes will vary depending on the size of the cuttings and the type of formations you are cleaning.

Shakers: There are two types of shakers ( Balanced Elliptical Motion Shale Shaker and Linear Motion Shale Shaker ).Elliptical isn’t a perfectly circular — it’s an ellipse or oval. Linear has vibration that is induced by a pair of eccentric (or eccentrically weighted) shafts turning in opposite directions. This type of arrangement allows for the development of...