How Is the Desander Working After the Drilling Mud Shale Shaker?

Desander http://www.kosungroup.com/products/solids-control-equipment/desander.html removes sand size particles and larger drilled solids, which have passed through the shale shaker screen. These solids are discarded along with some liquid into the waste pit. The clean mud is then discharged into the next pit ready to be run through the desilter.

Desander include two 12-in.(305-mm) diameter polyurethane hydroclones slant mounted over the shale shaker http://www.kosungroup.com/products/solids-control-equipment/shale-shaker.html. Each desander clone includes four replaceable wear resistant polyurethane sections that are joined together with quick release stainless steel clamps. The desander is furnished with an 8-in.(203-mm) diameter feed manifold and a 10-in (254-mm) diameter discharge manifold and a 0-60 psi (4.1-bar) pressure gauge. The desander also includes a solids discharge trough to distribute the hydrocyclone underflow evenly onto the screening surface.

Used desander of the Mission of Magnum with a cetain discharge to provide capacity and pressure to the desander, the Desilter and mud pump. The centrifugal sand pump http://www.kosungroup.com/products/solids-control-equipment/submersible-slurry-pump.html through more than 10 years developed site applications and enhancements by the surplus of the KOSUN, is in the domestic advanced level, either in the technical performance or the seal life and reached the same level as the other similar products away.

KOSUN desander is a combination of cyclone desander and shale shaker of drilling fluids. The high chromium cast iron is used for hydrocyclone. The lower little shale shaker is elliptical. The vibration generator is driven by vibration motor, which makes the screen box keep a integral forward elliptical motion.