Benefits and Features of Kosun Ls584-D Drying Shaker

The high G drying shaker http://www.kosun.us/drilling-waste-management/hi-g-dryer.html unit include a LS584-D drying shaker and a catch tank. It can handle the drilling cuttings or waste discharged from the primary solids control equipment of the rig. The discharged cuttings from the High G drying shaker is relatively dry for further treatment or transport. The drilling catch tank below the shaker is conical design, which is easy for cleaning and not easy to accumulate sand. It receives the mud after treatment by the drying shaker, and the outlet on the catch tank can be connected with the feeding pump of the decanter centrifuge.

Benefits and Features of Hi-G Dryer FOR Water-base Mud Treatment System
1.High integrated system control, space saving, small size and convenient for moving.
2.Simple process, convenient operation, high treatment efficiency. Over 300m3 water-base mud drilling waste can be treated per day, and water content of cuttings after treatment is within 15%-17%.
3.Low requirement for installation environment,lower cost,economical for operation.
4.Well-adapted for drilling waste treatment under different types of water-base mud systems.

Hi-G dryer is popular used for water based mud drilling cuttings treatment http://www.kosun.us/drilling-waste-management/. After Hi-G dryer, high speed centrifuge will be followed for further treating. After treated by centrifuge, solids parts can be used for construction; liquid part can be further treatment by flocculent unit. Hi-G dryer http://www.kosun.us/drilling-waste-management/hi-g-dryer.html is also can be used for oil based mud drilling cuttings treatment; vice versa, vertical cuttings dryer can also be used for water based mud drilling cuttings treatment. Based on this, KOSUN design it’s vertical centrifuge which can be used for both WBM and OBM drilling cuttings treatment.