Netw 589 Final Guide

NETW 589 Final Guide
Click Link Below To Buy:
http://hwcampus.com/shop/netw-589-final-guide/

Or Visit www.hwcampus.com

NETW 589 Final Exam Wireless Communication Keller

(TCO A) How do analog and digital signals differ? Describe the pattern. (Points : 25)

Analog technology translates information into electric pulses that have various…
(TCO A) How is information conveyed using FM (frequency modulation)? (Points : 25)

Information is conveyed using FM by beginning with a sine signal that serves as a…
(TCO B) Define circuit switching and packet switching. Explain why one is more appropriate for data. (Points : 25)

Circuit switching and packet switching are technologies used for…
(TCO B) What organizations have responsibility for standards covering more than one nation? (Points : 25)

These organizations are the ETSI (European Telecommunications Standards Institute) and the…
(TCO C) What is the difference between a BSS and an ESS? (Points : 10)

A BSS (Basic Service Set) refers to a network that contains only…
(TCO C) How many types of frames are used on a wireless network and what are they? (Points : 10)

There are three wireless frame types, such as the management frames, the control frames, and the…
(TCO C) Which security standard is compatible with the 802.11i standard and which ones are not? (Points : 10)

WPA (Wired Protected Access) and WPA2 (Wi-Fi Protected Access 2) are compatible with the…
(TCO C) Why does implementing RTS/CTS help speed data transmission? (Points : 10)

The RTS/CTS (Request to Send/Clear to Send) function is an 802.11 standard feature that controls…
(TCO C) What are the primary components of a WLAN? (Points : 10)

The three primary types of WLAN components are the wireless network cards, the wireless access points, and…
(TCO D) What is the difference between baseband and broadband? (Points : 15)

In baseband, data is transmitted as data signals through the media. It serves as a…
(TCO D)...