Words of Wisdom:

"opening your grandmas legs is like opening a grilled cheese sandwitch" - Graeffsgirl

Kosun Vc-1000 Series Vertical Centrifuge Can Meet the Drilling Waste Treatment

  • Date Submitted: 10/23/2015 12:34 AM
  • Flesch-Kincaid Score: 47.3 
  • Words: 402
  • Essay Grade: no grades
  • Report this Essay
As well know,vertical cutting dryer is also called vertical centrifuge, it is a very important part for drilling waste management on treating oil-based mud. KOSUN Vertical Centrifuge http://www.kosun.us/drilling-waste-management/vertical-centrifuge.html has been done strict balance testing for all major rotary components to minimize vibration and noise. The Vertical Centrifuge is the ideal products for oil-based drilling waste management.

KOSUN VC-1000 series Vertical Centrifuge produced by KOSUN is a type of vertical centrifuge, which can perform solid/liquid separation through centrifugal http://www.kosun.us/solids-control-equipment/decanter-centrifuge.html separation. The vertical cuttings dryer can effectively recover the liquid phase in drilling cuttings, making the solid phase become very dry. It is suitable for water-base mud, oil-base mud and synthetic base mud. By recovering the mud in drilling cuttings, the vertical cuttings dryercan reduce the drilling cost and cut down environmental pollution. With handling capacity of 40-60 T/h, the oil on cuttings (OOC) of drilling cuttings can be reduced to lower than 5% (w/w) after treatment, meeting the international emissions standards and environmental protection requirements. The vertical centrifuge can also be applicable for drilling waste management in onshore and offshore drilling.

VERTI-G Cuttings Dryers http://www.kosun.us/drilling-waste-management/vertical-centrifuge.html uses centrifugal force to dry drilled solids in oil or synthetic base fluids. A stainless steel screen bowl traps “wet” solids and accelerates them up to 900RPM with G force up to 420. Liquid is forced through the screen bowl openings, while “dry” solids are extracted by the angled flights attached to the cone, which rotate slightly slower than the bowl. Tungsten carbide protects the flights from abrasive solids and ensures long operational life. This aids in maintaining a constant gap between the scroll and screen bowl, which is...

Comments

Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments