How to Reduce the Fuel Cost of the Block Making Machine

1, in the use of the internal combustion of the brick, a certain amount of heat required to burn into the process to add fuel to the raw materials, as long as it can meet the requirements on the line, a little can not add, and more fuel self loading concrete mixer, is a waste of fuel in the production process. At the same time, to strengthen the kiln ventilation, supply enough oxygen, let the body burn the fuel, all play a role;Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:mini concrete batching plant for sale,concrete batching plants,concrete mixer,blocking making machine,concrete pump,etc.   2, to provide adequate air flow to the furnace, so that the fuel has sufficient combustion conditions, the wind can not be too large, can not be too small. Too the general assembly away more heat, so that the temperature in the kiln is reduced; too small, the amount of air combustion is not enough, the fuel can not be fully burned, the furnace temperature can not go up, but also a waste of fuel; 3, reasonable use of the gate, the timely use of brake, so that the amount of air and fuel in the kiln to achieve the most difficult to match, to promote the process of fuel combustion, and promote the rapid movement of the burning curve to achieve rapid burning, reducing fuel consumption purposes. Six is the timely to hit the door, the timely closure of the kiln door, and quickly to carry out the kiln operation, keep the kiln body has a higher temperature, and take full advantage of the waste heat of the kiln body. This can also reduce the amount of fuel used to reduce fuel consumption and reduce production costs;