Words of Wisdom:

"Reguardless of his looks, he isn't such a bad guy." - BIGWAVE01

River Gravel Crushing and Screening Complete Sets of Equipment

  • Date Submitted: 05/11/2012 12:35 AM
  • Flesch-Kincaid Score: 54.5 
  • Words: 451
  • Essay Grade: no grades
  • Report this Essay
River pebbles in the process of breaking face the biggest problem that the wear parts is subject to wear, which is because of the   very high silicon content in the river gravel. River pebbles stones factory project as a raw material, must carefully study the crushing process. As a crushing machine manufacturer in the case of client conditions allow, we recommend the possible use of laminating equipment and multi-stage crushing program. Laminating equipment (jaw crusher and cone break-based) to maximize the reduction of wear parts for wear and tear costs, while reducing the anti-material after the screening, increase the production capacity of the production line.

If the customer market dose not have strict requirements of the finished stone tablets, you can use the solution of the two broken jaw for production. This configuration is the minimum investment, repair and maintenance to the most simple solution, the most economical production costs of all programs. The disadvantage of this program, however, is the stone's grain type that are relatively poor, a higher proportion of elongated material. The stone on the market competitiveness is not high, because of high-grade building grain shape and excellent stone.

Grain type of product is excellent and can reduce production costs, then we can use two laminated crusher (jaw broken thin broken jaw / cone crusher) and crusher supporting technology programs. This configuration can make the broken work from beginning to break and two break to complete (the laminated broken), and finally by the back-breaking integer broken. This configuration process can greatly reduce the screening after the formation of anti-material. If a production line in the anti-material ratio is too high , it will make the final a crusher increase in the excessive and repeated broken, corresponding also makes the wear loss will be greatly increased.


Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments