Words of Wisdom:

"just because someone has more guy friends than girl friends, doesn't make them a mut - m + sl." - Ytiema

The Methods of Cleaning the Mining Magnetic Separator

  • Date Submitted: 11/15/2012 10:21 PM
  • Flesch-Kincaid Score: 53.9 
  • Words: 464
  • Essay Grade: no grades
  • Report this Essay
To clean manually clean drawer in housings, simply unlatch and remove the drawer and wipe the tubes with a rag or gloved hand. Easy clean models are cleaned manually, simply by unlatching and pulling a handle. The easy clean model is a good compromise between manually cleaning and automatically cleaning. Auto clean drawer in housings can be cleaned by the push of a button or cycled via a timer that is controlled by the system controller or separate timer relay. As the professional manufacturer of complete sets of mining machinery, such asore processing plant, Henan Hongxing is always doing the best in products and service.

When you try to clean a manually cleaning magnet, you can simply put a drop cloth or tarp under the magnet and switch the magnet off. Automatically cleaning magnets are designed with a hydraulic or electric motor driven heavy duty rubber belt that constantly rotates to discharge any tramp metal attracted to the magnet face.

Henan Hongxing magnetic pulleys are often used to replace standard pulleys in conveyor applications. Addition of the magnetic circuit to the pulley adds protection against tramp metal at a minimal cost. Magnetic pulleys are a very effective means of separation as all of the product passes over the pulley at the end of the conveyor and they continuously clean as the return side of the belt leaves the pulley.

Common uses for drawer in housings are for sugar, plastic pellets, carbon black, shot, and many other free flowing products. Location should be considered when deciding on a cleaning method.

Chute separators are constructed of housing with plate magnets on both sides that hinge or slide out. If the chute dimensions are too large for the tramp metal to be removed by just the outside plates, a wedge with plate magnets under it is added at the center of the chute to force all of the product to pass through the magnetic field.

To manually clean chute separators, simply unlatch and swing open or slide out the...

Comments

Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments