Words of Wisdom:

"Life is just a series of speed bumps." - Brendanpec

The Feasibility of Rotary Kiln on Building Construction

  • Date Submitted: 11/20/2012 12:51 AM
  • Flesch-Kincaid Score: 33.1 
  • Words: 1078
  • Essay Grade: no grades
  • Report this Essay
Rotary kiln application:

Rotary kiln is Thermal Equipment, heating materials, it is widely used in the fields of cement, Nonferrous Metallurgy, ferrous metallurgy, refractory material, chemical materials, paper making.

Rotary kiln feature:

1. Supporting device apply rolling bearing ( few with sliding bearing) to simple the bearing structure to slow down the kiln power consumption and it also improve the maintenance and inspection conditions.

2. Catch wheel: including two kinds mechanical wheel and hydraulic pressure

3. Gears: single or double. Control the rotating speed by buncher, DE machine and frequency variable motor. Be reliable, energy-saving, and efficient.

4. Cylinder type bolster: lower bolster has three types: fixed, zoom and floating. The structure is simple, replacement is convenient and won’t hurt cylinder.

5. Sealing equipment: there are many kinds for choice according to kiln models, including air cylinder edge sealing, spring edge sealing, and graphite block sealing and combination for above. The feather is adaptive for cylinder rotating and swing. And sealing effect is very good.

6. Kiln head hood: including stationary type and flexible type.

7. Transmission device apply speed adjustable motor with big speed adjustable range, stable operation, easy to maintenance advantages. Our Rotary Kiln has slow disk kiln structure, which is composed by Diesel engine, gearbox etc. It could continue to operate when electric stops, its operation is very flexible and convenient and easy for the kiln maintenance and inspection.

Rotary kiln is composed of cylinder, gears, support device, kiln liner and kiln tail sealing equipment, kiln head hood and combustion. Cylinder as heated pivoting part, made of high-quality carbon steel plate, is supported on the support device by type, and there is mechanical or hydraulic pressure catch wheel on the first or some gear in order to control the turning of cylinder. Gearing gyrate is according to...

Comments

Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments