Words of Wisdom:

"Real success is finding your lifework in the work that you love.David McCullough " - The_god_damned

Water Cocerns of Pakistan

  • Date Submitted: 12/16/2012 09:49 PM
  • Flesch-Kincaid Score: 35.1 
  • Words: 1926
  • Essay Grade: no grades
  • Report this Essay
Components of a modern power system:-
An electrical power system is composed by several components that form a complete system; from large generation units (generators, transformers, etc.) to distribution systems that connect the users to the electric power system (overhead lines, cables, insulators, etc.).
A transformer is a power converter that transfers AC electrical energy through inductive coupling between circuits of the transformer's windings. A varying current in the primary winding creates a varying magnetic flux in the transformer's core and thus a varying magnetic flux through the secondary winding. This varying magnetic flux induces a varying electromotive force (EMF), or "voltage", in the secondary winding. This effect is called inductive coupling.
If a load is connected to the secondary winding, current will flow in this winding, and electrical energy will be transferred from the primary circuit through the transformer to the load. Transformers may be used for AC-to-AC conversion of a single power frequency, or for conversion of signal power over a wide range of frequencies, such as audio or radio frequencies.
In an ideal transformer, the induced voltage in the secondary winding (Vs) is in proportion to the primary voltage (Vp) and is given by the ratio of the number of turns in the secondary (Ns) to the number of turns in the primary (Np) as follows:

By appropriate selection of the ratio of turns, a transformer thus enables an alternating current (AC) voltage to be "stepped up" by making Ns greater than Np, or "stepped down" by making Ns less than Np. The windings are coils wound around a ferromagnetic core, air-core transformers being a notable exception.
Transformers range in size from a thumbnail-sized coupling transformer hidden inside a stage microphone to huge units weighing hundreds of tons used in power stations, or to interconnect portions of power grids. All operate on the same basic principles, although the range of...


Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments