Words of Wisdom:

"Those who stoop to conquer are fools." - Ezslax

The Improvement of Sand Maker Technology Requires Constant Innovation

  • Date Submitted: 06/01/2013 03:11 AM
  • Flesch-Kincaid Score: 50.1 
  • Words: 443
  • Essay Grade: no grades
  • Report this Essay
The improvement of Sand maker   technology requires constant innovation. Henan Hongxing Mining Machinery Co., ltd has firmly grasped the world-level advanced sand maker technology through constant innovation. The new generation VI sand maker researched and developed by our company represents the most advanced Artificial sand maker   technology in our country. The sand maker technology has a direct bearing on the quality of the sand and stone aggregate. Faced with the future development, the sand maker manufacturing company must keep innovation in order to gain more development opportunities and make new achievements.
The main features of vertical crusher:
(1) Small product granularity so that it can be used as pre-crushing equipment in cements industrial production.
(2) The materials that are no bigger than 5mm account for 90%, and 20% are powder materials, so that the output of the Ball mill   is greatly improved by 15%~25%.
The LPM vertical crusher is composed by machine frame, principal axis, first rotor, second rotor, lining board and feeding and discharging mouth. The principal axis is installed on the machine frame through antifriction bearing, and two rotors are fixed on the principal axis. Two crushing chambers are formed inside the crushing machine , namely crushing chamber and squeezing and crushing chamber.
The crushing means of the vertical crusher is go-through crushing. Generally speaking, the materials go into the crusher from the feeding mouth, after going though the machine chamber, the materials become final products and are discharged out of the machine. For this reason, it is faster for the materials to go through the crusher. The big-sized materials go into the first crushing chamber from the feeding mouth, impacted and crushed by the plate hammer on the rotor which is rotating with high speed, and the materials that get dynamic energy are thrown to the cylinder lining board for further crushing, and the material lumps also...


Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments