Words of Wisdom:

"opening your grandmas legs is like opening a grilled cheese sandwitch" - Graeffsgirl

Replaceable Liners Fitted to Feed Box

  • Date Submitted: 06/25/2013 01:42 AM
  • Flesch-Kincaid Score: 53.1 
  • Words: 488
  • Essay Grade: no grades
  • Report this Essay
Inclined Screens - Features and Benefits
1 Replaceable discharge lips. These can be fitted with a variety of liners, for example; rubber, mild steel, abrasion-resistant steel etc.
2 Heavy-duty, stress-relieved decks which can be rubber covered. A variety of decks can be fitted dependent on the material to be screened (woven wire, polyurethane, rubber etc.).
3 Angles bolted to the top and bottom of the side-plates greatly increase their strength.
4 High-strength friction grip bolts are used in the construction of the screen providing reliable but easily replaced connections.
5 Standard SPC belt drive.
6 Pivoting motor base supplied as an option (reduces load on belts starting, driving and stopping).
7 Motors can be fitted with plug break starters to briefly run screen in reverse when stopping. This ensures smooth screen run-down.
8 Precision laser-cut sideplates ensure a high-quality, fatigue-resistant product.
9 Spring bases can be supplied as fixed or pivoting thus enables screen to be positioned at different angles to suit application.
10 Feed box evenly distributes material on to deck of screen reducing wear.
11 Replaceable liners fitted to feed box and discharge lips.
12 Robust grease-lubricated vibrating unit provides powerful circular motion along complete length of screen.
13 Can be used for finished screening but is also suitable for scalping duty.
Horizontal Screens - Features and Benefits
Horizontal or low-angle screens are ideal where height is critical. One, two, three or four decks are possible. The screens can be used for sizing or scalping applications. The size range is 1220 x 2500 (4’ x 8’) to 1500 x 9600 (8’ x 30’).
1 The straight line vibrating motion is produced by two or more eccentric shafts geared together. By varying the timing of the gears, the vibrating motion can be...


Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments