Words of Wisdom:

"Asking why is a waste of breath" - SETH

Dolomites - Take Family Vacationing to New Heights!

  • Date Submitted: 09/29/2013 03:26 AM
  • Flesch-Kincaid Score: 24.3 
  • Words: 571
  • Essay Grade: no grades
  • Report this Essay
First, choose the appropriate dosing regimens, stability of raw meal composition. A high lime saturation coefficient, high rate of silicon raw material is not easy to occur in the phenomenon, and the clinker quality is better, but the material is fireproof, on the operation requirement is high. If low lime saturation coefficient and low rate of aluminum raw material, the sintering range is narrow, and the liquid phase amount slants mucto buy portable ballast crusherh, agglomeration is thick, has slightly carelessly will lead to cabbage. So in production as far as possible to choose two of proportioning scheme, namely high KH, high SM, IM, the ingredients and easy operation and low clinker quality is relatively stable. Second, try to use containing harmful substances lower raw material, especially coal; to strengthen coal homogenization, and can meet the production requirements at the same time as much as possible to reduce the fineness of pulverized coal; calcining process to strengthen the wind and coal mixed coal, avoid too rough and caused by incomplete combustion; such as the use of volatile low coal, because of its slow rate of fire, burning a long time, the fire intensity of concentration, should try to reduce coal fineness and water.
If the kiln has been formed into a ball material should cause all-around analysis, sampling tests, and were on the ball, ball shell of nuclear chemical analysis, seek exact cause, an antidote against the disease.
If the ball is relatively small, the operation should be appropriate to increase the ventilation in the kiln, so that the flame is smooth, but attention must be paid to the kiln temperature control, so that it should not be too high; may slightly reduce the kiln head coal, but must ensure that the pulverized coal complete combustion, and appropriate to reduce the volume of feed, slightly reducing kiln speed, let the kiln material ball rolled into the burning zone; material such as a ball to the burning zone, to...

Comments

Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments