Words of Wisdom:

"We all marvel at the beauty of the Butterfly, but rarely take into account the changes it has undergone to get there." - Axotlyorill

Working Principle of Multi-Cylinder Hydraulic Cone Crusher

  • Date Submitted: 10/10/2013 12:07 AM
  • Flesch-Kincaid Score: 27.1 
  • Words: 398
  • Essay Grade: 3,00 /5 (1 Graders)
  • Report this Essay
Multi-cylinder Hydraulic Cone Crusher has the following benefits and features. It configures the insurance cylinder, lock cylinder and hydraulic drive hydraulic cylinder - three kinds of insurance agencies. Those not only act as the insurance role, but also cannot disassemble the machine parts to achieve treatment failure;The discharge opening width can automatically adjust, easy operation and high reliability;The crushing chamber is designed by grain laminated principle, with the corresponding speed, so as to increase the production ratio and the processing capacity, and can increase levels of finished materials cube;Occurred in iron-passing and in an instant case of stuffy machine, the hydraulic device can automatic adjust the discharge range to reducing the manual cost than the old spring cone crusher,And easy maintenance, low running cost;Hydraulic adjustment device, thin oil lubrication and labyrinth seals, virtually eliminating the ole type spring cone crusher common failures, such as oil-water mix; the laminating crushing theory helps to produce multi-product cubic structure, and significantly reduce the pin sheet material;Concave & mantle uses high-manganese steel, coupled with changes in the crushing chamber and laminate crushing principle, to greatly reduced wearing of machine. General service life is longer than old type spring cone crusher.

Its working principle: When multi-hydraulic one crusher working, motor drives the eccentric bushing to rotate through V-belt, transmission shaft and transmission gear, and makes movable cone swing back and forth. The driven cone with single hydraulic cylinder can adjust the outlet, clean the cavity, overload and iron pass protection, and other functions; and materials are continuously squeezed and impacted in the crushing cavity and then discharged from the bottom. The spring safety system is overload protection device, which makes metal objects through the crushing chamber without damage the machine, using two...

Comments

Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. Hydraulic cylider
    •  
    • Oct 19, 2013 - Evaluator: (Shalininissi)
    • Your information about the hydraulic cylinder cone crusher is nice. Is it using single or double acting hydraulic cylinder?