Inspection of Daswell Js Concrete Mixer Before Test Run

DASWELL JS series concrete mixer is twin-shaft compulsory mixer. Not only it can work independently mobile block machine, but also it can work with PLD series aggregate batcher to make a simple concrete plant or is adopted as the mixer in the high-end concrete batching plant. In addition, JS500, JS750, JS1000, JS1500A are researched and developed by ourselves; JS1500B, JS2000, JS3000 adopt Italy sicoma technology.

Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:mobile block machine, etc. We will provide you with the best product and service.

DASWELL JS series concrete mixer is an ideal choice for common commercial concrete. They are widely used to produce dry hard concrete, plastic concrete, flow concrete, light aggregate concrete, various mortars, etc. Suitable for all kinds of big, medium and small precast concrete plant; widely applied in roads beton mixer, bridges, water projects or other industrial and civil projects.

Install concrete mixer

The fabricating yard of concrete mixer should be neat and smooth. Make concrete foundation at places where install supporting legs.

Sling the JS concrete mixer by using crane and then install supporting legs, a supporting leg brace and diagonal bracing. Take the concrete mixer into place and then install the sliding rail and climbing ladder.

Concrete mixer inspection before test run

1. Check whether there is enough lubricating oil in the reduction box and at each lubricating point.

2. Inspect the supply voltage of concrete mixer and make sure the rated voltage is 380 volts and error is +5% to -5%;

3. Check the wirings of motor and electrical components is firm. Make sure the shell of distribution box must be reliably landed. All line pipes shall be properly placed in order to prevent bringing accidents for concrete mixer at work.

4....