Words of Wisdom:

"only users lose drugs!" - Gautam

Do You Know the Techniques of Selecting Hammer Head?

  • Date Submitted: 11/12/2013 12:26 AM
  • Flesch-Kincaid Score: 53 
  • Words: 442
  • Essay Grade: no grades
  • Report this Essay
I believe that most of us know that the main application of small hammer crusher: small hammer crusher is mainly used to crush various stone materials with medium hardness and weak abrasion resistance. The compression strength of the materials should not exceed 100MPa and the moisture content should be smaller than 15%. The materials to be crushed include coal, gypsum, brick and limestone and so on.

Generally speaking, the small hammer crusher can be divided into two kinds: single-rotor hammer crusher and double-rotor hammer crusher. And the single-rotor hammer crusher can be classified into reversible and irreversible hammer crusher.

Our small hammer crusher features in compact structure, reasonable layout, convenient installation, good maintainability and simple operation. And it has good adaptability to the cement production techniques. And the biggest advantage of small hammer crusher compared with other stone crushers lies in that the hammer crusher has large crushing ratio.

In addition, The main working parts of small hammer crusher include rotors with hammer. Usually, a rotor is composed of main shaft, circular disc, hinge pin and hammer. When working, the electric engine drives the rotors to rotate with a high speed in the crushing cavity. And raw materials will be crushed during the rotating process and discharged from the screen plate.

Thus we can see that the role of hammer crusher is more more important. Then I think that we should know something about the techniques of selecting hammer head. And I will write something about it. I hope you will like it.

The techniques of selecting hammer head is as following :

Hammerheads are the main parts of hammer crusher. When buying hammer crusher equipment, you can select wear hammerheads of high quality through the following five aspects:

1. Material of the hammerhead

2. Structure design of the hammerhead

3. Manufacturing process of the hammerhead

4. Technical parameters of the...


Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments