All the Working Process Are in Need of Cone Crusher

All the Working Process Are in Need of Cone Crusher. In building, mining, railway and other places, the crushers are applied. They can bring us many benefits and profits so numerous suppliers and manufacturers can be found online. When it is used, the electric motor after the triangle belt impetus eccentric shaft, causes to move the jaw the vertical motion to crush the material, and this can make it achieved certain granularity less advanced enters the rotation cavity. At the time the material, including stone of larger size receives the rotor in the rotation cavity and decides the jaw the attrition stave, the stave material discharges from under hopper.The shapes of them are diverse and there is a kind of cylinder shaped eccentric shaft lining of cone crusher available. The lining skin is made up of steel plate and its inner hold should be processed into interlaced dovetail slot to make the babbitt metal lining easily fixed. When the bronze lining ovality is bigger than diameter's 0.002 or the interval is too small, we should use machining to process it. When the gap between the eccentric shaft and the shaft lining is too big, it will cause noise, overload and uneven wear in gearing mesh. So we should repair it in this moment.

Then this machine may adjust the turnover material granularity through the loose and tight bolt and the addition and subtraction filling piece. During the process, it is needed to use the circumference to give the material, broken than for the material scope. So large power is required to finish this job. However, the screw cap is easy to loose under the large power, so we should check and fix the screw often. Other maintenance jobs are also needed to be done frequently to makestone crusher and other crusher a good state.

The leading products of Fote Machinery includelignite rotary dryer, brewer's grain drying machine, jaw crushing machine and so on. Moreover, we can provide program design, process flow design, standard and...