Words of Wisdom:

"It's not about death... but *life*." - Majora

Three Factors Influencing Capacity and Quality of Cone Crusher

  • Date Submitted: 05/06/2014 11:25 PM
  • Flesch-Kincaid Score: 25.5 
  • Words: 498
  • Essay Grade: no grades
  • Report this Essay
Crushing Machine is the core equipment in the ore crushing system of ore beneficiation plant as well as the main factor restraining the production capacity of the crushing system. Through the comprehensive analysis of nip angle and parallel zone and through capacity of materials in center section of cone crusher when materials are crushed,ball mill processing gold we can know that the main factors influencing the capacity and product quality of cone crusher include the following three factors:
(1) The length of the parallel crushing zone and the size of discharging mouth
The crushing ability of a crusher machine is related to the thickness of the material layer in the parallel zone which is in direct proportion to the production capacity and has a direct relation with the discharging mouth. Increasing the length of the parallel zone is conducive to controlling the granularity, aggregate crushing equipment manufacturers but the ore discharging ability will decrease, and reducing the length of the parallel zone is conducive to ore discharging, but the ore crushing granularity is difficult to be ensured. At the same time, the productivity of a crusher is mainly related to the ore property, the performance, specification and operation condition of the equipment and the configuration of the machines in the production process, for this reason, on the condition of the other factors unchanged, changing the operation condition, increasing the ore discharging mouth, for example, will change the productivity of the crusher equipment.
(2) Nip angle and the volume of the crushing chamber
The crushing chamber is related to the nip angle and the height of the crusher machine. Theoretically, the nip angle should be smaller than two times of the frictional angle between ores and lining board of the crushing wall. If the nip angle is too big, ores inside the crushing chamber will slide,iron ore mining processing method which will reduce the production capacity; if the nip angle...


Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments