How About Recovery Rate of Gold Ore Processing Plant

According to the survey, Gold Ore Processing Plant in China use the jaw crusher for primary crushing, using standard cone breaker broken, whereas finely with short head type taper crushing machine and the roller breaker.Medium and small gold factory USES two section of a closed-circuit crushing, mostly large choose gold plant adopts the three sections of a closed-circuit crushing process.In order to improve the processing capacity of gold ore beneficiation plant, mining equipment potential, and the crushing flowsheets, raise the utilization factor of grinding machine, the main measures is to implement more crushing less grinding, lower into the ground ore granularity. And how about Recovery Rate of Gold Ore Processing Plant?

Gold ore processing plant flow to choose gold flotation device;Our country 80% choose gold factory flotation method is used to choose gold, concentrate much sent to the output of nonferrous smelting processing. Due to the growing development of the gold, and the enterprise to improve economic efficiency, reducing loss of concentrate transport, major changes have taken place in the product structure in recent years, many take on-site processing (of course also because the problems such as the contradiction between the mineral intergrowth and valuation, forcing mines in situ disposal) prompted flotation technology has larger development, in the selected gold production occupies an important position.

Main characteristics of gold ore concentration plant are as follows:1. The technology is reliable, adaptable of minerals, such as arsenic, carbon, microgranular package type gold deposits, etc., and can in arsenic, carbon, sulfur content, use a very wide scope.2. Environmental conditions good control, environmental pollution-free.3. Less investment.Undressed ore roasting investment cost is lower than the roasting of gold concentrate, far below the cyanide and bacterial oxidation;4. The recovery rate is high, the economic benefit is obvious,...