The Working Parts and Working Principles of Ring Hammer Crusher

Ring hammer crusher is mainly used for crushing various mid-hard and weak abrasive materials. The compressive strength of the materials does not exceed 100MPa and the moisture content of the materials should be less than 15%. The generally crushed material include coal, salt, chalk, plaster, brick, limestone and so on. It is also used to crush fiber structure, strong flexibility and toughness broken wood, paper or broken asbestos cement waste for recycling asbestos fiber and so on. In addition, the ring hammer crusher canbe used for crushing materials not only in the production line, sand production line, but also in mineral production line taking the place of cone crusher.The main working parts of the ring hammer crusher is the rotor with hammer. The Rotor is mainly composed by the spindle, disk, pin and hammer components. The motor drives the rotor rotate at a high speed in the crushing cavity. Materials feed into the crusher from the upper mouth and crushed by the blow, impact, shear, abrasive and grinding with the high-speed rotating hammer. In the lower part of the rotor, there installs with sieve plate, the size of the crushing grain materials is less than that of which will be discharged through the sieve, the size larger will remain on the sieve to have a continuously grinding by a hammer blow, and finally will be discharged out through the sieve plate.The compressive strength of the material that was crushed by the ring hammer crusher is no more than 100 MPa, the moisture content of which is less than 15%. The generally crushed material include coal, salt, chalk, gypsum, bricks, limestone, etc. The ring hammer crusher is also used in crushing the broke wood of fiber structure, flexibility and strong tenacity, paper or broken asbestos, slags of cement for recycling of the asbestos fibres and so on.In addition, ring hammer crusher can be used not only in crushing production line, it can also be used in the sand making production line. And can be used in...