How to Improve Rice Milling Machine Work Efficiency? Standard Operational Considerations

In order to improve rice milling machine work efficiency, together for single or multi-branch sawing, be sure to do a good job supporting fixture positioning.

Sawing operation shall be strong, to wait before cutting the motor speed can reach full speed.

Not allow anyone to stand behind saws, power failure, Rice milling machine rest or leave the work place, immediately turn off the power.

Shall not stop the blade from the saw or RICE MILLING MACHINE work piece loosen any one hand or arm lift.

Do not operate when the guard is not in place, cannot put your hands away from the blade 15 cm or less. Rice milling machine Not lean over or bypassing saw, operation body Xiece 45 degrees is appropriate.

Appear unusual sounds, immediately stop checking; rice milling machine repair or replacement of parts must be cut off before the power and other blade has completely stopped.

Using cutting machine, such as when working in wet places, RICE MILLING MACHINE must stand on dry insulating mats or on the board. Ascend or explosion hazardous areas such as safety precautions must be prepared to use.

Shakes and other equipment failures, rice milling machine should immediately stop repair, prohibited ill and taking stimulants and drink operations, the operation is forbidden to wear gloves. If during operation will cause dust, Rice milling machine wear a mask or face shield.

Processing should be finished off, rice milling machine and make cleaning equipment and surrounding venues.

Link: www.rice-mill.org