Mobile Continuous Mixing Plant

Any trucks, no matter what functional it is, if we can keep our eyes open on their maintenance when daily using, it will be surely performance better. To extend concrete mixer truck using life, much maintenance method and clean belt conveyor types concrete batch plant manufacturer price
are inevitable whenever it is using or not in using. The following tips can be very useful to keep truck in a good condition.

Concrete Mixer Truck should be set in the flat position, paving the front and rear axle with square wood, so that the tire resting on a high overhead, so as to avoid moving around when starting. Concrete truck should implement the 2 level leakage current protections. After the power is turned on, you must carefully check the empty test switch that confirms qualification before use. Commissioning should be tested under normal circumstances if drum speed is appropriate.

The proportion of after charging empty speed vehicles is slightly faster 2 to 3 turn, if the difference of the speed is too much, that means you should adjusted to move the ratio of the wheel mini concrete mixing equipment manufacturer price
and drive wheel. Speak about the part of mixer truck, No water in the barrel, in order to avoid the barrel and leaf rust. Works should also clean up the mixing drum fouling, mechanical to kept clean and intact.

Check the clutch and brake device's reliability. Idling in the mixing cylinder, add water 1 - 2min, check the transmission clutches and brakes are flexible and reliable before work. If the wire rope damage or not, and whether track pulley is good. Check the lubrication at the fuel circuit and control equipment, as required, filling oil around the barrier-free and the parts of the lubrication.

After the booting, always pay attention to all parts of the Concrete Truck is functioning properly. When the machine shut down, often check whether the concrete mixer blades bent, or nail loose screws. In the running process of concrete mixer,...