Characteristic of Kosun Shale Shaker!

The Characteristics of shale shaker can be observed easily, all sides of ofits operation are visible. Shale shakers http://www.kosungroup.com/products/solids-control-equipment/shale-shaker.html offered the advantage of not degrading soft or friable cuttings. When operated and maintained correct, shale shaker can produce a relatively dry cuttings discharge.

The shale shaker’s main role is to remove as much solids as possible and reduce the solids loading in unweighted muds, in order to the downstream hydrocyclones and centrifuges to improve their efficiency. In muds containing solid weighting agents such as barite, the shale shaker is the primary solids removal device.

It is usually relied upon to remove all drilled cuttings coarser than the weighting material. Downstream equipment will of ten remove too much valuable weighting material. Enough shakers should be installed to process the entire circulatingrate with the goal of removing as many drilled cuttings as economically feasible. Given the importance of the shale shaker, the most efficient.

Shakers and screens should be selected to achieve optimum economic performance of the solids control system. Shale shaker performance has a function of:

1. G-forces linear motion up to 7.4 G (adjustable depending on the situation).
2. Hi-speed conveyance of cuttings.
3. Higher shaker-fluids capacity.
4. Able to process heavier solids loads
5. Enhances cuttings processing volume.
6. AWD device from -1°~5°.
7. Single side shaker screens tension system to easily change the screens.
8. Shaker feeder can be weir type and header box.
9. Hook-strip screens can be PMD and PWP screens.

In simple terms the principle of operation, a shale shaker works by channelling mud and solids onto vibrating screens. The mud and fine solids pass through the screens and return to the active system. Solids coarser than the screen openings are conveyed off the screen by the vibratory motion of the shale shaker. The shale shaker...