Get the Classification Information of Cement Ball Mill

Cement can be not only hardened in the air, but also better hardened in the water in which it will maintain and develop strength. So cement is kind of cementitious material which will be of stronger hardness in water. The cement ball mill is widely applied in mineral classification, cement,chemical industry,etc. It can grind all kinds of rocks and grindable materials. This ball mill machine has two ways of grinding: The dry process and wet process. The ball grinding mill has been increased about 20% and unit product power consumption has been reduced 10%-12% down.

Ball mills are used primary for single stage fine grinding. It is the key equipment that repulverizes the material after it is crushed, which is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer and can be used for the dry and wet pulverization for all kinds of ores and other grindable materials. Classification of the cement ball mill:

1. High-yielding fine cement ball mill: high yield cement mill is mainly used for open circuit grinding system. Its characteristics are: the process is simple, low investment, the plant covers less area; the mill structure using advanced special compartment within the separator device, the second chamber increased an activation device, a dedicated grate board at the discharge of the mill, to minimize the size of the grinding material in grinding chamber, greatly improve the grinding efficiency and achieve high output, low energy consumption purpose.

2. Ordinary cement ball mill: mostly for ordinary cement mill circuit grinding system, which is characterized by high grinding efficiency, big mill yield, lower power consumption, especially in grinding slag cement, the performance is better. General mill output can be increased 15-20%, about 10% lower power consumption, in addition, reduce product temperature 20-40 ℃, product fineness is also easy to adjust.

Welcome to visit Hongxing...