Words of Wisdom:

"life is full of choices.......and excuses" - Aggie5394

Improving Productivity of High-Efficient Jaw Crusher

  • Date Submitted: 10/22/2014 11:19 PM
  • Flesch-Kincaid Score: 42.6 
  • Words: 356
  • Essay Grade: no grades
  • Report this Essay
Lubrication of the contact surfaces must be fully and evenly. But in rolling oil filled seat level should not exceed 50-70% of its volume. Depending on the operating situations you can fill oiling once every 1-2 days, it is best that change lubricating oilevery quarter. Meanwhile, the bearings thoroughly cleaned and for the inspection. Jaw crusher maintenance work, primarily focused on lubrication, tightening, adjustment and cleaning and other aspects.In the work process of high -efficient jaw crusher, the friction surface should be timely reliable lubrication, thus ensuring the long-term normal operation of the crusher. Therefore, for each lubrication must pay special attention. High-efficient jaw crusher lubrication: We used lubrication system is normally provided by the oil pump, filter coolers, fuel pressure regulators, fuel tank, tubing, instrumentation indicating devices and other components. When the pressure is too high or excessive oil flow, can through the oil pressure regulating valve to adjust, in the normal lubrication process, the flow of oil must be appropriate. The lubrication system oil return temperature is not higher than 600 degrees, the normal temperature of the tank should be controlled in 35 ~ 50 ℃. When the oil temperature is too high, measures should be taken to water cooling, hydraulic pressure should be less 0.5 than atm. Henan Hongxing has the quite rich experience and solid strength in the independent design and manufacture cement production line, iron power production line, ceramsite sand production line and pellet production line,etc.And it has through the strict international quality system certification.The high-tech content, high reliability, low maintenance cost make our products has been at the industry-leading level. At present, our factory has been exported to more than 40 countries, used in mining and construction widely.Henan Hongxing Mining Machinery Co., Ltd. is a joint-stock mining machinery manufacturing enterprise...

Comments

Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments