Words of Wisdom:

"This World Is Filled With Evil Tempertantrums And Sonic Explosions" - Dellarh

Working Staps and Detailed Knowledge About Kosun Drilling Fluid Decanter Centrifuge

  • Date Submitted: 01/15/2015 12:18 AM
  • Flesch-Kincaid Score: 42.8 
  • Words: 366
  • Essay Grade: no grades
  • Report this Essay
KOSUN Drilling Fluid Centrifuge http://www.kosungroup.com/products/solids-control-equipment/decanter-centrifuge.html is designed to speed up the settling process. The rotating speed is transformed into centrifugal force inside the rotating assembly to accelerate particle settling in accordance with Stoke’s Law. In essence, a centrifuge is a miniature settling pit that alloys very rapid settling of solids under controlled conditions.

The first decanter centrifuge http://www.kosungroup.com/products/solids-control-equipment/decanter-centrifuge.html with middle speed was acted as the fourth phase solids control equipment. It is used for recovering barite which is an expensive material for drilling mud. A decanter centrifuge with good barite recovery can help reduce drilling cost and increase drilling efficiency. The second generation of decanter centrifuge will be used for the treatment of the drilling cuttings. Usually, it is used downstream from vertical cuttings dryer after high G shaker for WBM. It is used to cover useful drilling mud from drilling cuttings.

Drilling mud decanter centrifuges http://www.kosun.us/products/black-rhino/black-rhino-centrifuge.html are designed specifically to remove unwanted solids and fine particles from virtually all kinds of used drilling mud, including those based on water/synthetics and conventional oil-based drilling fluids.

The Working Steps of Drilling Fluid Centrifuge
Step 1: The slurry is inserted into the centrifuge through a connecting pipe and onto a conveyor.
Step 2: Utilizing an internal feed compartment, the conveyor ushers the slurry through a nozzle into the bowl area.
Step 3: The bowl rotates at high speeds to induce gravitational forces.
Step 4: High speed rotation separates the solid material from the liquid in a matter of seconds.
Step 5: The conveyor delivers the solid material upwards where it is discharged through a nozzle.
Step 6: The solid material is removed, the purified liquid is released...


Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments