Kosun Can Provide the Drilling Waste Management (Dwm) Services

Drilling during drilling waste http://www.kosun.us/drilling-waste-management/ underground seepage and efflux of groundwater and surface water pollution have serious,centrifuge drilling adverse impact on the surrounding ecology, so the drilling wastewater pollution become cleaner production in oil and gas drilling an arduous and urgent task.

Zero waste discharge still remains a bit away after going through the previous four steps, therefore solidification, thermal desorption, cuttings reinjection and biodegradation will be utilized to push towards the goal as the last step. Hi-G dryer: KOSUN Hi-G Dryer can recover water- and oil-based mud in drill cuttings with fluid phase down below 10% and remarkable reduction on waste discharge cost. It is especially good at managing oil-based drill cuttings.

Hi-G dryer shaker and vertical centrifuge http://www.kosun.us/drilling-waste-management/vertical-centrifuge.html can be introduced as drill cuttings usually take away much drilling mud and thus raise drilling cost. Hi-G dryer manages oil content and water content down to 10% from 30% while vertical cutting dryer lowers oil on cuttings below 5%, to the greatest degree, with small rotary speed and centrifugal filtration. Either of them is effective to recover drilling mud and shrink drilling cost.

Drilling waste management (DWM) services http://www.kosun.us/drilling-waste-management/ provided by KOSUN Oiltools reduces wastes generated during drilling activities to acceptable environmental levels. As part of our drilling waste management services, we also supply highly skilled staff to ensure equipments are installed correctly and that they are fully operational and well-maintained. Our employees, who trained to provide support swiftly, are on-call worldwide 24 hours a day, everyday, to be available at a moment’s notice.

If you are interested in our DWM solids control http://www.kosun.us/drilling-waste-management/ equipment and services, you can click the...