Words of Wisdom:

"Always bear in mind that your own resolution to succeed is more important than any one thing. Abraham Lincoln" - The_god_damned

Advantages and Characteristics of Kosun Vertical Cuttings Dryer

  • Date Submitted: 07/22/2015 12:23 AM
  • Flesch-Kincaid Score: 43.7 
  • Words: 328
  • Essay Grade: no grades
  • Report this Essay
KOSUN vertical cuttings dryer http://www.kosun.us/drilling-waste-management/vertical-centrifuge.html, which can effectively deal with water-based, oil-based and synthetic-based drilling fluids and drill cuttings generated extremely dry, reducing emissions cuttings recovered a large number of drilling fluid, reducing drilling costs, while protecting the environment.

KOSUN vertical cuttings drier characteristics and advantages:

Environmental conservation:
1. Efficient solid-liquid separation, so that the amount of fluid containing cuttings minimized.
2. Reduce the amount of processing drilling waste.
3. effective separation of recyclable lot of drilling fluid for reuse in the circulating mud system.
4. Recycling failure due to vibration sieve, sieve clogged rig move and the loss of all the mud, cost-effective.

Ease of operation:
1. Programmable Logic Controller (PLC), with automatic alarm indicator, it can monitor the temperature, torque, fuel and run time.
2. High-capacity continuous feed device, it can fully meet the required amount of processing drilling.
3. Tungsten carbide coating and separate adjustable vanes reduce wear and ensure optimum performance.
4. handrails and walkways to facilitate the operator routine maintenance, reducing personnel risk.
5. different sizes of screen operations to meet customer needs in different conditions.

Easy to maintain:
1. From the top of the device is easy to enter and easy replacement of normal wear parts. Without removing the gear assembly, you can easily replace the belt.
2. interchangeable tungsten carbide blade to protect the rotor and gear box, to avoid excessive corrosion, the failure rate of the main components to a minimum.
3. explosion-proof motor and the control panel have passed CE / ATEX certification.

Untreated drilling mud and drilling waste at sea and onshore drilling projects, due to the drilling mud solids control equipment http://www.kosun.us/solids-control-equipment/ failure and...

Comments

Express your owns thoughts and ideas on this essay by writing a grade and/or critique.

  1. No comments