Verti-G Dryer Is the Best Choice Used in Liquid/Solid Separation

The vertical cuttings dryer is a machine designed to reduce the operator’s total fluids cost and limit waste disposal volumes. This is achieved by directly recovering the fluids from the cuttings, and by recovering any weighted mud from the shaker screens http://www.kosungroup.com/products/product-accessories/screen.html avoiding that it can be lost due to a failure of the shaker, a movement of the rig or the occlusion of the screen. The machine helps meet certain fluid-on-cuttings discharge requirements that must be abided by.

The VERTI-G dryer http://www.kosun.us/drilling-waste-management/vertical-centrifuge.html gives operators a critical advantage in meeting increasingly stringent environmental rules for cuttings disposal. The flow of cuttings into the VERTI-G dryer is PLC-controlled and continuously fed to yield optimum liquid/solid separation. Once cuttings are introduced into the dryer’s charge hopper, widely spaced, independently adjustable flights continuously direct cuttings to the shaker screen surface. Flights are tungsten carbide coated to reduce abrasion and ensure optimum tolerance.

Hi-G dryer shaker http://www.kosun.us/drilling-waste-management/hi-g-dryer.html and vertical centrifuge can be introduced as drill cuttings usually take away much drilling mud and thus raise drilling cost. Hi-G dryer manages oil content and water content down to 10% from 30% while vertical cutting dryer lowers oil on cuttings below 5%, to the greatest degree, with small rotary speed and centrifugal filtration. Either of them is effective to recover drilling mud and shrink drilling cost.