Vertical Cuttings Dryer System Can Treatment the Ooc Is Lower Than 5%

As is well-known, vertical cuttings dryer is the mostly used important equipment for drilling waste management. It is also called VERTI-G cuttings dryer. KOSUN vertical cuttings dryer http://www.kosun.us/drilling-waste-management/vertical-centrifuge.html has been proved with excellent performances during drilling waste disposal process. The vertical cuttings dryer is a machine designed to reduce the operator’s total fluids cost and limit waste disposal volumes.

The vertical cuttings dryer system catches any lost mud and returns it to the active mud system. The recovery systems work well with diesel, mineral and synthetic oil based mud. The system has proven to be more efficient with synthetic systems due to the ease of oil separation from larger cuttings. Synthetic systems also have a higher mud value, which makes the machine more attractive from an economical point of view. In addition, the system reduces the amount of wastes at the rig site and the resulting disposal costs.

Cuttings dryer can effectively treat the water-based, oil-based, and synthetic-based drilling mud, generate very dry drilling cuttings, reduce the discharge volume of drilling cuttings and recover precious drilling mud, so as to improve comprehensive drilling cost-effectiveness. The vertical centrifuge http://www.kosun.us/drilling-waste-management/vertical-centrifuge.html independently developed and manufactured by KOSUN features with mature performance, including super strong separation ability. With top feeding mode and built-in high speed centrifugal drum, it can achieve the maximum handling capacity of 60T/h, and the OOC of drilling cuttings after treatment is lower than 5%.

Since the waste to be disposed contains much water and consumes lots of chemical agents, the solution costs much, achieves unsatisfactory results and fails to completely eliminate pollution risks. Facing local governmental requirements on environmental protection, domestic onshore oilfields now attach more...